Tag Archives: Taurus

Repetition and Progression (Part 2)


The most important Fundamental of all is to be sure your gun works. A recently purchased used revolver seemed okay in most aspects except the cylinder lockup had a hitch. Upon actually shooting it, it worked fine for the first 10 rounds. After that, the trigger could not be pulled with the cylinder closed. As I suspected, something was wrong with the center pin spring and the center pin would not push the bolt into position when the cylinder closed. Moving the bolt into position before it will fire is fundamental to double action revolver design.

Upon examining it later, there was no center pin spring, hence the issue. Someone had obviously messed with it because the extractor rod came free quite easily. Fortunately, the sear/bolt spring for a S&W fit adequately and fixed the problem.

As my colleague, the late Paul Gomez, was fond of saying, “Shoot Yor ….. Guns.”

After repairing it, I used it for another form of progression in practice, increasing distance incrementally. Starting out at a close distance, marking your target after each string, and then increasing the distance gives you an indication of where your strengths and weakness lie. Knowing them gives you an idea of what to practice next.

Continue reading →

Gun tests

Taurus Manufacturing has officially released the Curve, a small, polymer .380 pistol with a distinct curved frame, meant to comfortably wrap around your hip or thigh when carrying inside the waistband or in a pocket, respectively.


Here’s my gripe about ‘range tests’:

First, some quick range notes: After handling and firing the Curve I can straight away can [sic] tell you that the 100 or so rounds I fired through the gun fed well and the empty cases ejected perfectly. The long trigger was decently smooth and the recoil, while sharp, was manageable. And not only was the gun a reliable shooter, it also hit where I aimed, thanks in part to its integrated light and laser.

How much meaningful information does that convey? What distance, what was the target, what speed, what anything? How about putting a trigger pull gauge and ruler to it? Then we might know what ‘long’ means, in a couple of dimensions.

I’m actually interested in doing a comparative test of the Curve. Anything that has generated so much hate without even being seen, handled, or fired deserves a second look. Perhaps I’ll do something even slightly scientific, such as firing it on the same course of fire as a full size gun or perhaps a competitive gun, e.g., an LCP.

If they’re going to fire 100 rounds anyway, why not do something meaningful with it? For example, “I fired the XX State weapons carry qualification course with the Curve and an LCP. With the Curve, I was able to make a score of XX in a time of XX. The LCP gave me a score of XX in XX seconds. So, XX produced better results, for me, than the XX. Then I fired the same course with a Glock 17, which produced XX results. So the smaller guns gave up XX percentage of performance.”

Larry Potterfield, of MidwayUSA, even developed his own analysis protocol for testing handguns. His procedure is not what I would use but I give him credit for doing something original, measured, and somewhat informative.

C’mon guys, this isn’t that hard if you think about it just a bit. You don’t have to put on a Top Gear show to provide some kind of meaningful information for people to use in decision-making.